T-Motor U10 Plus U-Series Motor

MLI_1225

This is the newest U10 motor is the U-Series line called the U10 Plus.  Offering the greatest Efficiency to thrust in its class this is one serious performer.

This is the King of the motors with a completely custom build from the ground up with Hollow Shafts and bolted in bearings with three screws not just one. Hand built and hand wound these are guarantied to exceed your expectations.

This is designed for LARGE scale models that need serious thrust to power consumption ratios.

Specifications:

 

Details Coming Soon.

T-Motor U10 U-Series Motor

MLI_1093

This is the King of the motors with a completely custom build from the ground up with Hollow Shafts and bolted in bearings with three screws not just one. Hand built and hand wound these are guarantied to exceed your expectations.

This is designed for LARGE scale models that need serious thrust to power consumption ratios.

Specifications:

[su_table]

KV 100
Configuration 32N42P
Shaft Diameter 15mm
Motor Dimensions(Dia.*Len) 86.8×35.5mm
Weight (g) 400g
ldle current(10)@10v(A) 1.4A
No.of Cells(Lipo) 6-12S
Max Continuous current(A)180S 35A
Max Continuous Power(W)180S 1500W
Max. efficiency current 3-20A 89%
Internal resistance 112mΩ

[/su_table]

T-Motor 28×9.2 Carbon Fiber Propeller Pair

MLI_1107

These are some serious propellers from T-Motor.  Designed as two piece props and machine balanced to ensure the best flight possible.  You get two pairs of propellers, a CW and CCW set.  Each set is balanced to the matching half and the kit even includes small colored dots for pairing identification you can add if needed.

The mounting hub allows you to mount these to a M6 hub or directly to the U-Series motors that support this propeller.  The build is full carbon Fiber manufactured in a one step process with absolutely zero flaws.  Even the tips are flared for the best aerodynamics and thrust.

Weight: 1lbs
Dimensions: 16″ x 3.5″ x 2″

T-Motor U5 v2.0 U-Power Series Motors

MLI_0756.jpg

The T-Motor U-Series motors are the Professional Motors designed from the ground up for the commercial sector designed in Germany.  The U5 v2.0 are brand new and designed for the Medium DSLR camera range with all weather reliability and water proof design.  New airflow designs allow 2x more air to flow through the motor allowing high voltages without the wasted energy as heat.

Further designs include a Bolted in shaft, no c-clips or parts to pop off for the most demanding customers.  Add is the completely sealed upper motor for dust and dirt protection and you have a motor designed to work for you and be ready any day any time.

Each Motor is hand build, Hand Wound and held to military inspection standards.  This means you get a quality product ready to go that will last.   It is also completely rebuild-able if needed too.

[su_table]

Specification U5 v2.0 400KV

Configuration 12N14P
Shaft Diameter 4mm
motor Dimensions ?42.5×37.5mm
Weight 152g
Idle Current @ 10A 0.3 Amps
Lipo Cells 3-8S
Max Continuous Current @180 Seconds 30 Amps
Max Continuous Power @180 Seconds 850 Watts
Max Efficiency Current 10-18 Amps > 84%
Internal Resistance 116m?

[/su_table]

Weight: 0.5lbs
Dimensions: 5″ x 5″ x 3″

T-Motor 29×9.5 Carbon Fiber Propeller Pair

MLI_0803.jpg

These are some serious propellers from T-Motor.  Designed as two piece props and machine balanced to ensure the best flight possible.  You get two pairs of propellers, a CW and CCW set.  Each set is balanced to the matching half and the kit even includes small colored dots for pairing identification you can add if needed.

The mounting hub allows you to mount these to a M6 hub or directly to the U-Series motors that support this propeller.  The build is full carbon Fiber manufactured in a one step process with absolutely zero flaws.  Even the tips are flared for the best aerodynamics and thrust.

Weight: 1lbs
Dimensions: 16″ x 3.5″ x 2″