MLI_2117.jpg
MLI_2118.jpgMLI_2119.jpgMLI_2120.jpgMLI_2121.jpgMLI_2122.jpgMLI_2123.jpgMLI_2124.jpg

MAVLink-OSD (MinimOSD)

$44.99

MAVLink-OSD is an Arduino based project and is fully compatible with original MinimOSD. This board can be used for the Crius All-in-One Pro/Arduflyer/ArduPilot-Mega.

SKU: MAVOSD-V1 Categories: , , ,

Product Description

MAVLink-OSD is an Arduino based project and is fully compatible with original MinimOSD. This board can be used for the Crius All-in-One Pro/Arduflyer/ArduPilot-Mega.

MAVLink-OSD is outfitted with a switching DC/DC step-down power supply to maximize efficiency on the power system. This means no more heating problems when using the MAVLink-OSD board. It must be used with two power sources, 5V from flight controller and 12V from the camera system.

Hardware Features:

  • ATMEGA328P micro-controller
  • MAX7456-EUI monochrome on-screen display
  • 5V/500mA DC/DC regulator for MAX7456-EUI
  • Operating voltage: 5V(FTDI/communications connector) and 12V(Video I/O connector)
  • Supports NTSC & PAL
  • FTDI connector

Software features:

  • Full MAVLink protocol support
  • Graphical configuration tool (PC Only)

Other

  • Dimension: 19mmx39mm (this doesn’t include the connector)
  • Weight: 5g/6g (including cable)

Default firmware is the original but we suggest upgrading to MinimOSD-Extra firmware for added features (default for our RTF and custom builds).

MinimOSD-Extra firmware is written by Gábor Zoltán.

Information on how to use the configurator tool to setup OSD function:

https://code.google.com/p/minimosd-extra/

How to setup hardware (original Wiki):

https://code.google.com/p/arducam-osd/wiki/How_to_start_minim

Weight: 0.01lbs
Dimensions: 2″ x 2″ x 1″

Additional Information

Weight 0.01 lbs
Dimensions 5.08 x 5.08 x 2.54 in